 HomeNewsWhy AreInternal Mixer so Popular

Why AreInternal Mixer so Popular

2022-09-22

The internal mixer is developed and produced on the basis of the open mixer. The Internal Mixer is also called "closed rubber mixer ". Its principle is to use two rotors in a sealed laboratory, which rotate relative to each other and have different speeds , the speed ratio is different, this process is called plasticizing. In the process of plasticizing, we will add additives. This process is called mixing. The function of mixing is to strengthen and reduce costs, and then vulcanization and vulcanization. The function is to restore elasticity, and then it is formed.

According to statistics, the combined products of rubber, plastics and plastics account for 88% of the products produced by the internal mixer. It can be seen that there are many applications of the internal mixer. Internal mixers cost more than open mixers and occupy a larger area, but they are still so popular. Why? Xiaobian to answer for you.

1. The internal mixer is safe. Because it adopts closed rubber mixing, no one needs to turn the rubber, which avoids unsafe accidents.

2. Save resources and funds and protect the site environment. Saving resources saves money, because the internal mixer is mixing rubber in a closed laboratory. During the process of plasticizing and mixing, it will not cause dust to fly, so it will not cause the loss of additives and rubber. with waste. Thereby also protecting the environment.

3. Improve the efficiency of rubber mixing. The open mixer is unsafe and inefficient due to the need to manually turn the rubber. The internal mixer is different. It does not require manual turning of the rubber. The two rotors of the internal mixer can completely turn the rubber. .

The above editor only listed 3 points, maybe there are more, but the main ones are these 3 points. To sum up: safety, high efficiency, high savings. I think that with these three points, the mixer will be more popular than some other rubber and plastic equipment. Of course, some other devices also have their value. For example, an open mill can open sheets, and has a small footprint and low cost. Rubber or plastic that requires high temperature control needs to use an open mill. For example, some manufacturers or companies that are just starting out can consider an open mill first. , and then slowly start using the mixer. This can save a lot of money compared to just starting companies.

The above is about rubber machinery. If you want to know more about our company's dynamics or products, you can consult us. We also sell Dispersion Kneader, Rubber Internal Mixer, Rubber Open Mill, Two Roll Mill, Plastic Granulator and Extrusion Pelletizer.

internal mixer

Previous: Granulator Classification Introduction

Next: The Difference Between Mixer And Kneader