 HomeNewsHow to Maintain the Dispersion Kneader

How to Maintain the Dispersion Kneader

2021-11-01

The V-belt should be of the same length, put it in the transmission box, and be tightly tightened. Tighten the slide bolts and cover the top cover. If the equipment is not needed for long-term parking, the power supply must be cut off, all the smooth parts should be filled with oil, and the main shaft and cylinder should be oiled to prevent rust. The fuel tank uses 46# hydraulic oil, which is replaced every six months and the fuel tank is cleaned. The filter screen is cleaned once a month, and once every two or three days after the oil change. The gears, bearings, balls, shafts and sleeves and cylinders of the rolling parts of the dispersing machine are filled with oil once a week. If overheating or abnormal noise is found during operation, it should be checked in time.

The use of the dispersing machine is also related to the environment:

1. In the higher and lower temperature of the environment, it should be selected within the allowable scale. If there is any over-tolerance, a special order must be made.

2. In the environment where the humidity is relatively high, and there are occasions such as water droplets and rain, we should choose a waterproof dispersion machine.

3. In the environment where there are frequent vibrations, bumps and impacts, special varieties should be selected, such as marine dispersers.

4. In a corrosive or explosive environment, you can use a corrosion-resistant dispersion machine that should be selected according to the safety requirements.

5. If the environmental space is restricted, please choose a multifunctional dispersing machine.

The above is about the dynamics of the dispersion machine. If you want to know more about our company's dynamics or products, you can consult us. We also sell Dispersion Kneader, Rubber Internal Mixer, Rubber Open Mill, Two Roll Mill, Plastic Granulator and Extrusion Pelletizer.

Dispersion Kneader

Previous: The Structural Characteristics of The Kneader

Next: The Advantages of Using a Large Extrusion Granulator